SCIA User Contest 2017 Online Book

150 Category 4: Special Projects 4 Owner SV Sandhausen 1916 e.V. Architect INWO-Bau-GmbH General Contractor Dielmann Gerüstbau GmbH, Stahlbau Alfred Müller GmbH Engineering Office Ryklin STATIK Construction Period 05/2015 - 06/2016 The temporary Layher scaffold tribune by Soccer Club SV Sandhausen had to be disassembled, because after five years the permission to use it as a “Flying Structure” could not be extended. SV Sandhausen asked to find a solution to keep the tribune for further use. It is only possible, if the tribune complies with the obligations of the standard “Permanent Structure”. That means the tribune has to withstand additional higher loads with higher safety factors and requires a new solid foundation (instead of soil anchors with ballast). Additionally, the new bigger roof and a new facade were required. After a detailed investigation of the existing scaffold and pre-calculations the order was confirmed. The tribune with new roofing and the required foundation was detailed in SCIA Engineer with Structure and 3D-Free-Modelling tools. All eccentrics and pliability’s due to Layher admittance were proved in-situ and implemented in the model. The calculations and analysis were processed with the help of the SCIA Scaffold tool. To check the tribune according to the standard for permanent usage, different variants of strengthening of the scaffold structure were realised. All the overviews, elevation, execution and detail drawings were processed and created in SCIA Engineer using the appropriate Modelling and Drawing Tools. The biggest difficulty was to find the right position for the strengthening rods and plates, to adjust the new roofing to the existing scaffold and to find the fixing solution for the new facade. The required permission as a permanent structure was given and the tribune is in use. Scaffold Tribune Reinforcement - Sandhausen, Germany Ryklin Statik Contact Sergej Ryklin Address Liselottestrasse 17 69123 Heidelberg, Germany Website www.ryklin.eu Planning and optimization of Steel, Aluminium, Solid, Composite, Timber and Membrane Structures. More than 1300 different projects processed, a. o. residential and industrial buildings, park decks, pedestrian bridges, swimming pools, silos, membrane coverings etc. for Daimler AG, John Deere AG, SAP AG, DB AG, Siemens AG, Henkel AG, BASF AG, Bridgestone AG, Roche AG, IKEA AG, ENBW and a lot of private clients. The Philosophy of the Company is to offer the flexibility in planning due to integral 3D-Design with ability for finding feasible and low-cost solutions already on the draft stage.