39 X Nemetschek Structural User Contest 2013 - Category 1: Buildings Category 1: Buildings 1 Project information Owner IKEA GmbH Architect nps tchoban voss architekten General Contractor Klein + Albert und Partner GmbH Engineering Office Dipl. - Ing. S. Ryklin STATIK Location Hamburg Altona, Germany Construction Period 12/2012 to 05/2014 Short description │IKEA Roof Parking Space with Side Ramp The first IKEA City Store has to be built on the smallest surface - about 10,000 m2 - that an IKEA Haus has ever been built. The dimensions of the whole building are about 140 x 85 x 36 m. Due to the space limit, the required parking space for 730 customer cars is placed on the top of the building at the height between 20.5 m and 31 m. It contains four parking levels. The side ramp structure, about 36 m high, connected the parkdecks with the street. The “outside” part of the connected together parkdecks and ramp is planned as a composite steel/concrete structure. Five solid cores from the main building for the stairwells and lifts penetrate the decks and are used, together with the bracing, for the stabilisation of the structure. The 1.4GB model contains about 8,600 1D elements, 1,200 2D elements, 50 3D objects, 550 crosssections, 33 materials and 160 loads. The main challenge was considering the effects caused by the temperature forces. Dipl. - Ing. S. Ryklin STATIK Contact Sergej Ryklin Address Liselottestrasse 17, D-69123 Heidelberg, Germany Phone +49 6221 830973 Email [email protected] Website www.ryklin.eu Sergej Ryklin - Born in 1963 in Moscow 1981-1985: Civil Engineering; “Bridges/Tunnels”; Since 1993: Structural designer and verifier at “Römhild & Hecker” Consulting Engineers in Landau, Germany; Since 1997: Structural designer; 2008-2009: Master’s Study at the Institute for Membrane and Shell Technologies, Anhalt University of Applied Sciences, Germany Range of Capacity: Planning and optimisation of steel, aluminium, solid, composite, timber and membrane structures; Project consultancy; Building physics calculations; Dynamics calculations, Project verification Philosophy: Flexibility in planning due to integral 3D design with the ability to find feasible and lowcost solutions from the draft stage on. Experience: Residential and industrial buildings, parking spaces, pedestrian bridges, swimming pools, silos, membranes… References: Daimler, John Deere, SAP, DB...
RkJQdWJsaXNoZXIy MTgyMDE=