112 Category 3: Industrial Buildings and Plants 3 Owner Cimsa Cimento Architect IBAU Hamburg General Contractor IBAU Hamburg Engineering Office STATIKA OK Construction Period 09/2016 - 10/2016 The control bin with a diameter 4.0 m is used in the process of the concrete production in concrete mixing plant. The cylinder height is 5.7 m, cone height is 1.3 m. The bin is supported on the three anchoring points. On the cone, two holes for the exit of the material are designed. The main challenge of the modelling was the complicated geometry, the Eurocode defined load acting on silos is always laborious to assemble. All the difficulties were overcome using SCIA Engineer software, the especially great advantage is the very fast solver enabling us to perform geometrical and material nonlinear analysis with the dense finite element mesh relatively quickly. The graphical results provide a fast insight into the response of the structure for every type of analysis used. The Engineering Report simplifies and speeds up preparation of the project documentation. Cement Plant Control Bin - Eskisehir, Turkey Statika OK Contact Jan Blažík Address V Parku 181/6 736 01 Havířov, Czech Republic STATIKA OK, ing. Jan Blažík is a design and engineering company founded in 1992. From the early beginnings the company focused on the common steel structures of any type, with the specialization of the technological ones – complicated bins, silos, tanks, hoppers and similar constructions for bulk storage and handling, petrochemical and gas industries.
RkJQdWJsaXNoZXIy MTgyMDE=