50 Category 1: Buildings 1 Owner Dr. Göbel Architect Architekturteam Peter Göhrig General Contractor Gerhard Wolf GmbH Engineering Office Ryklin Statik Construction Period 02/2014 - 05/2014 The old residential house in Mannheim had to be renovated. Additionally, next to renewing or strengthening of the inner substance due to new planning, the façade of the inner courtyard in the 1st and 2nd floor should be open to get more light inside. To achieve this, half of the house with the roof has to be pulled down and then build up again with the appropriate costs. The idea was to contain a part of the wall through steel claiming and use it as a load bearing part for the floors. Two variants were developed. The first one with the load bearing part outside was cheaper, but it may disturb the working on the façade. The second one with the load-bearing part inside was more complicated to build in, but more friendly for other work. The project was processed in SCIA Engineer with structure-, 3D-freemodelling- and drawing tools with presentation of all details in the 3D-model directly. The calculations were done according to the second order theory. All the overviews, elevation, execution and detail drawings were processed and created in SCIA Engineer with the appropriate modelling and drawing tools. The production and execution of the steel claiming and new steel-glass facade was realised by the company Wolf, GmbH Lampertheim with casual engineering site controlling. The demolition work, required improvement and preparation of the ground structure was processed by the owner. The complete planning with execution took around 6 months. Residential House Renovation - Mannheim-Seckenheim, Germany Ryklin Statik Contact Sergej Ryklin Address Liselottestrasse 17 69123 Heidelberg, Germany Website www.ryklin.eu Planning and optimization of Steel, Aluminium, Solid, Composite, Timber and Membrane Structures. More than 1300 different projects processed, a. o. residential and industrial buildings, park decks, pedestrian bridges, swimming pools, silos, membrane coverings etc. for Daimler AG, John Deere AG, SAP AG, DB AG, Siemens AG, Henkel AG, BASF AG, Bridgestone AG, Roche AG, IKEA AG, ENBW and a lot of private clients. The Philosophy of the Company is to offer the flexibility in planning due to integral 3D-Design with ability for finding feasible and low-cost solutions already on the draft stage.
RkJQdWJsaXNoZXIy MTgyMDE=