39
X
Nemetschek Structural User Contest 2013 - Category 1: Buildings
Category 1: Buildings
1
Project information
Owner
IKEA GmbH
Architect
nps tchoban voss architekten
General Contractor
Klein + Albert und Partner GmbH
Engineering Office
Dipl. - Ing. S. Ryklin STATIK
Location
Hamburg Altona, Germany
Construction Period
12/2012 to 05/2014
Short description │
IKEA Roof Parking Space with Side Ramp
The first IKEA City Store has to be built on the smallest surface - about 10,000 m
2
- that an IKEA Haus
has ever been built. The dimensions of the whole building are about 140 x 85 x 36 m. Due to the space
limit, the required parking space for 730 customer cars is placed on the top of the building at the height
between 20.5 m and 31 m. It contains four parking levels. The side ramp structure, about 36 m high,
connected the parkdecks with the street. The “outside” part of the connected together parkdecks and
ramp is planned as a composite steel/concrete structure.
Five solid cores from the main building for the stairwells and lifts penetrate the decks and are used,
together with the bracing, for the stabilisation of the structure.
The 1.4GB model contains about 8,600 1D elements, 1,200 2D elements, 50 3D objects, 550 cross-
sections, 33 materials and 160 loads.
The main challenge was considering the effects caused by the temperature forces.
Dipl. - Ing. S. Ryklin STATIK
Contact
Sergej Ryklin
Address
Liselottestrasse 17,
D-69123 Heidelberg, Germany
Phone
+49 6221 830973
Email
Website
Sergej Ryklin - Born in 1963 in Moscow
1981-1985: Civil Engineering; “Bridges/Tunnels”; Since 1993: Structural designer and verifier at
“Römhild & Hecker” Consulting Engineers in Landau, Germany; Since 1997: Structural designer;
2008-2009: Master’s Study at the Institute for Membrane and Shell Technologies, Anhalt University of
Applied Sciences, Germany
Range of Capacity:
Planning and optimisation of steel, aluminium, solid, composite, timber and
membrane structures; Project consultancy; Building physics calculations; Dynamics calculations,
Project verification
Philosophy:
Flexibility in planning due to integral 3D design with the ability to find feasible and low-
cost solutions from the draft stage on.
Experience:
Residential and industrial buildings, parking spaces, pedestrian bridges, swimming pools,
silos, membranes…
References:
Daimler, John Deere, SAP, DB...
